Panasonic LKM-F933-1 Bedienungshandbuch Seite 13

Formatting of SuperDisk / 2DD or 2HD disk
for Windows 95 / 98 / NT4.0
(You can also use the Formater attached with Windows 95(OSR2.x), Windows 98 or
Windows NT4.0 .)
1. Insert a disk that you wish to format into the SuperDisk drive.
2. Right-click on the " Removable Disk " or " 3 1/2 Floppy " (Windows 95(OSR2.x)
/ Windows 98 / Windows NT4.0) icon.
3. Left-click on the " Format utility For SuperDisk ".
4. " Format Utility for SuperDisk " window appears.
Follow the procedures displayed on the screen to perform formatting of disk.
for DOS / Windows 3.1
If your system is under Windows 3.1, reach the DOS prompt C:\.
(assumes that your SuperDisk drive is designed "D" and your hard disk drive "C".)
1. Insert a disk that you wish to format into the SuperDisk drive.
2. When formatting a 2DD or 2HD diskette, perform Standard formatting.
When formatting a SuperDisk disk, type " FORMAT D: " and press <Enter>.
* = one space
for Windows NT3.51
1. Open "Format Utility for SuperDisk" on "Program Manager" window.
2. Open "SuperDisk Format Utility" icon.
3. Follow the procedures on the screen.
Note : Low-level formatting for SuperDisk disk is not supported.
A-10