Inhaltsverzeichnis
Werbung
OBJ_BUCH-2509-002.book Page 23 Tuesday, October 25, 2016 2:36 PM
above or below the specified no-load speed (see "Tech-
nical Data"), have the machine checked by an author-
ised service agent for Bosch power tools. When the no-
load speed is too high, the application tool can break;
when the no-load speed is too low, the working perfor-
mance is reduced.
Use only original cables! Before each use, check the
power tool, cable and plug for possible damage. Cables
and plugs may not be repaired, but must be exchanged in
order to avoid danger.
Have maintenance and repair work performed only by
qualified specialists. In this manner, it can be ensured
that the safety of the power tool is maintained.
Clean the connection sockets, couplers and plugs of the tool,
after it has been disconnected from the mains supply, using a
dry, lint-free cloth and remove dust and dirt particles.
Clean the gearbox after the first 150 running hours using a
mild solvent. Follow the solvent manufacturers directions for
use and disposal. Lubricate the gearbox using Bosch gearbox
lube. Repeat the lubrication procedure every 300 hours after
the initial gearbox service.
An authorized Bosch after-sales service agent will carry out
this work quickly and reliably.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Please store and handle the accessory(-ies) carefully.
Accessories
Information about the complete quality accessory program
can be found on the Internet at www.bosch-pt.com and
www.boschproductiontools.com or at your dealer.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com
Disposal
The machine, accessories and packaging should be sorted for
environmental-friendly recycling.
Do not dispose of power tools into household waste!
English | 23
1 609 92A 36J | (25.10.16)
Werbung
Inhaltsverzeichnis
