Behringer X-TOUCH COMPACT Schnellstartanleitung Seite 12

22 X-TOUCH COMPACT
X-TOUCH COMPACT RX MIDI DATA
(EN)
This RX MIDI data table shows what can get controlled and changed from outside (via MIDI receive) independent of the X-TOUCH editor software.
(ES)
Esta tabla de datos RX MIDI le indica qué puede controlar y modifi car desde el exterior (a través de datos MIDI recibidos) independientemente del programa
editor X-TOUCH.
(FR)
Ce tableau de données RX MIDI indique les fonctions pouvant être contrôlées et modifi ées de manière externe (par réception de messages MIDI)
indépendamment de l'éditeur X-TOUCH.
(DE)
Diese RX MIDI-Datentabelle zeigt, was man unabhängig von der X-TOUCH Editorsoftware von außen (via MIDI Receive) steuern und ändern kann.
(PT)
Esta tabela de dados RX MIDI mostra o que pode ser controlado e modifi cado de fora (através de MIDI receive) independentemente do software editor X-TOUCH.
Function RX CH RX Command
Operation Mode Select GLOBAL CH CC 127
Preset Layer Change GLOBAL CH Program Change
Fader Movement GLOBAL CH CC 1 – CC 9
LED Ring Behavior GLOBAL CH Encoders 1-8:
Change CC 10 – CC 17
Encoders 9-16:
CC 18 – CC 25
LED Ring Remote GLOBAL CH Encoders 1-8:
Control (Value Change) CC 26 – CC 33
Encoders 9-16:
CC 34 – CC 41
Buttons LED Remote GLOBAL CH Upper Top Row 1-8:
Control Note 0 – Note 7
Upper Mid Row 9-16:
Note 8 – Note 15
Upper Bottom Row 17-24:
Note 16 – Note 23
Lower Row 25-33:
Note 24 – Note 32
Right Area 34-39:
Note 33 – Note 38
Layer A, B LEDs:
Not assignable; only 1 of 2 LEDs lights
if Standard mode selected (see above
"Preset Layer Change")
Status LEDs Remote GLOBAL CH Foot Switch LED: CC 42
Control
Exp. Pedal LED: CC 43
MC Mode LED:
Not assignable; lights
only if MC mode selected
(see above "Operation Mode Select")
USB LED:
Not assignable; always
active if valid connection
to computer available
MIDI I/O LEDs:
Not assignable; always
active while data transfer
RX Value
0 = Standard Mode, MC Mode LED off
1 = MC Mode, MC Mode LED on
2-127 = ignored
ONLY in Standard Mode (see above):
0 = Layer A, A-button LED on
1 = Layer B, B-button LED on
2-127 = ignored
0-127 = Fader position, bottom to top
0 = Single
1 = Pan
2 = Fan
3 = Spread
4 = Trim
5-127 = ignored
0 = all LEDs off
1-13 = LEDs 1 (left) – 13 (right) on
14-26 = LEDs 1 (left) – 13 (right) blinking
27 = all LEDs on
28 = all LEDs blinking
29-127 = ignored
Note off or Note on with Velocity 0: Button LED off
Note on with Velocity 1: Button LED on
Note on with Velocity 2: Button LED blinking
Note on with Velocity 3-127: ignored
1-8
9-16
17-24
34-39
25-33
For Foot Switch:
0-63 = LED off
64-127 = LED on
For Expression Pedal:
LED only on while data transfer (value change)
Specifi cations
Controls
Rotary/Push controls with LED collar 16
Buttons with LED backlight 39
Faders 9 motorized faders, 100 mm, touch-sensitive
Foot control (expression) ¼ " TS
Foot switch (sustain) ¼ " TS
Presets (*user programmable) A*, B*, MC mode
MIDI
Input 5-pin DIN
Output 5-pin DIN
Communication in USB mode MIDI interface for computer only
Communication in stand alone mode MIDI in with merge to MIDI out
Computer Connection
USB USB 2.0, type B
USB Hub
Type Multi-TT USB 2.0
Connectors (x2) USB 2.0, type A
Voltage (USB power to external devices) 5 V
Communication Between external devices and computer, not to unit
Active Hub active only when unit in USB mode
Power Supply
Type Internal switch mode power supply
Voltage 100-240 VAC, 50/60 Hz
Fuse T 1A H 250V
Power consumption 25 W
Mains connection Standard IEC receptacle
Physical
Standard operating temperature range 5°C to 40°C (41°F to 104°F)
Dimensions (H x W x D) 100 x 391 x 301 mm (3.9 x 15.4 x 11.9")
Weight 3.7 kg (8.2 lbs)
Quick Start Guide 23