Philips AVENT SCF398 Bedienungsanleitung Seite 13

4A Push the inner part of
the cushion into the
funnel against the line
(indicated with an arrow).
7. Connect the tube(s) to
the motor unit.
Note: You can place
the cover over the
cushion to keep the
breast pump clean while
you are preparing for
expressing.
5. Place the silicone
diaphragm in the pump
body.
8A. When the breast
pump is charged, you can
use it cordless. Press and
hold the on/off button
until the device switches
on.
5A Make sure that the
silicone diaphragm fits
securely around the rim
by pressing it down with
your thumbs.
8B. You can also use the
breast pump connected
to the wall socket. If the
battery is low, insert the
adapter into the wall
socket and insert the
small plug at the other
end into the motor unit.
English
6. Attach the silicone
tube and cap onto the
silicone diaphragm.
Push down the cap until
it is securely in place.
9. The breast pump is
now ready for use.
15