White Balance; Stabilisation; Motion Detection Function; Night Exposure - Medion md 85733 Gebrauchshandbuch

White balance

The camera sets the white balance automatically.
If you notice a colour imbalance on the LC
display while filming then change the white
balance setting.
Then continue recording.
The following settings are available:
Setting Clarification
Auto Factory setting.
The camera sets the white
balance automatically.
Daylight For filming in daylight.
Fluorescent For filming in fluorescent
light light.
Light bulb For filming in electric light.

Stabilisation

This setting can be used to reduce blurring as a
result of unsteady shooting.
The recorded image becomes smaller if the
stabilisation function is activated.
The digital zoom is deactivated if the stabiliser
function is enabled.

Motion detection function

You can make video recordings automatically in
this setting as soon as something moves for three
seconds in the display window. Recording stops
automatically when no movement is detected for
more than three seconds.

Night exposure

For better results with night shots select "On"
in the "Night exposure" menu.

Finishing

Select "SALIR" to exit the movie mode
without setting changes.
ES
Recording films
EN
DE
PT
39