Forest-Master FM16 Bedienungsanleitung Seite 24

16MW Stand
Remove the R-clips from the
rear axles and remove each
wheel/axle assembly from the
legs. retain the R-clips.
Remove the upper bolts holding
the front feet and legs to front
leg mount and remove the front
foot assembly. Keep the nuts
and bolts as they will be used in
reassembly.
Join the foot assembly to the front leg
mount (using the existing nuts and
bolts). The bolt should pass through
the upper of the two holes in each of
the legs as shown.
24
Screw the castors into the front foot. Ensure
that a plain washer and a spring washer is
placed between each castor and the foot.
FM16(D/T/TW/P)