Setting The Intensity - schwa-medico AS SUPER 4 digital Gebrauchsanweisung

Elektrischer nadelstimulator

Vorschau ausblenden Andere Handbücher für AS SUPER 4 digital:

Gebrauchsanweisung (40 Seiten)

Gebrauchsanweisung (18 Seiten)

Gebrauchsanweisung (40 Seiten)

Inhaltsverzeichnis

Verfügbare Sprachen

schwa-medico

Enter the selecting mode:

Press the

key for 4 seconds to enter the selecting mode.

This is indicated by an acoustic signal an shown on the

display by 2 different programs flashing in the illustration

beside.

Select a program for channels 1 and 2:

Press the

key of channel 1 to select the program group.

Press the

key of channel 2 to select the subprogram.

Select a program for channels 3 and 4:

Press the

key of channel 3 to select the program group.

Press the

key of channel 4 to select the subprogram.

The frequency and the pulse width of the selected programs also flash on the display.

If you do not make any changes for 4 seconds, the device automatically returns

to the stimulation mode. This is indicated by an acoustic signal. The stimulation

can then be started by increasing the intensity with the keys of each connected

channel.

Example: Selecting program 1.0 for channels 1 and 2 and program 1.3 for chan-

nels 3 and 4

Switch ON the device by pressing the key.

Press the

key until you have selected the program group no. 1.

Press the

key until you have selected the subprogram no. 0.

Press the

key for 4 seconds to enter the selection mode for the stimulation with

2 different programs. Both programs flash on the display.

Press the

key of channel 3 to select the program group no. 1.

Press the

key of channel 4 to select the subprogram no. 3.

4 seconds after pressing the last key, the device returns to the stimulation mode.

This is indicated by an acoustic signal.

The stimulation can then be started by increasing the intensity with the keys for

each connected channel.