Operating The As Super 4 Digital; Needle Placement And Connecting To The Device; Switching On The Device; Program Selection - schwa-medico AS SUPER 4 digital Gebrauchsanweisung

English

Operating the AS SUPER 4 digital

Needle placement and connecting to the device

Connect the cables to the AS SUPER 4 digital unit. Place the needles into the skin
on the appropriate acupuncture points. Connect each needle with the crocodile
clips at the end of the cables. Please clip at the lower part of the needles in order to
keep the needles approximately straight. The crocodile clip should not be in con-
tact with the patient's skin. Please note that you always need 2 needles per cable.

Switching ON the device

Press the key to switch ON the AS SUPER 4 digital.

Program selection

Program group
Select a program group (1.0 to 9.0) by pressing the P key.
To scroll through the program groups, press the P key as
often as necessary until you have selected the program
group of your choice. Once you have reached the last program group, you will
return to the first one.
Subprogram
Select a subprogram by pressing the E key.
To scroll through the subprograms, press the E key as often as necessary until you
have selected the subprogram of your choice. Once you have reached the last sub-
program, you will return to the first one.
Example: Selecting the program 2.2 (Han 3)
Turn ON the device by pressing the key.
Press the P key until 2.0 is shown on the upper left side of the display. You have
selected the program group no. 2. Press the E key until 2.2 is shown on the upper
left side of the display. You have now selected the subprogram no. 2.2.The stimu-
lation can then be started by increasing the intensity with the keys of each
connected channel.

Stimulation with 2 different programs

The AS SUPER 4 digital offers the possibility to stimulate
with one program for channels 1 and 2 and with another
program for channels 3 and 4.
27