Carrier WTC-IR-LB Installationsanweisungen Seite 7

LIGHTING CONFIGURATION
Two lighting groups are set by default.
■
Eight lighting groups can be selected.
■
To set the number of controlled lighting
groups
1. Press and simultaneously for
3 seconds.
2. The lighting icon
number of controlled lighting groups is
displayed.
3. Press repeatedly to select the number
of lighting groups.
Example:
4. Press or wait 20 seconds to validate
your selection automatically.
flashes and the
BLINDS CONFIGURATION
Two blinds groups are set by default.
■
Eight blinds groups can be selected as
■
maximum.
Depending on the type of blinds installed in
the room, the system may be configured to
control the tilt mechanism.
To set the number of controlled blinds
groups
1. Press and simultaneously for 3 sec.
2. The blinds icon
of controlled blinds groups is displayed.
3. Press repeatedly to select the number
of blinds groups.
Example:
4. Press or wait 20 seconds to validate
your selection automatically.
To activate the tilt mechanism
1. Press and
2. The tilt icon flashes and ON is
displayed.
To deactivate the tilt mechanism
1. Press and
2. The tilt icon flashes and OFF is
displayed.
flashes and the number
simultaneously for 3 sec.
simultaneously for 3 sec.
7