Attachment; Connection With The Mains - EuroLite DL-105 Bedienungsanleitung

When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
The device can be installed in the wall or ceiling.

Attachment

Before attaching the device, make sure that the installation area can hold a minimum point load of 5 times
the device's weight.
The device must only be installed at a vibration-free, oscilation-free and fire-resistant location.
Please refer to the instructions under Operating Determinations.
The given minimum mounting depth must be kept.
Please note: The recessed luminaire must always be well-ventilated.
Procedure:
Select an installation spot for the luminaire. Cut an opening with the correct mounting dimensions at the
desired installation-spot.
Connect the luminaire and test the function before you fix the device at the installation-spot.
Secure the luminaire to the ceiling by placing it with its associated mounting tabs against the surface.

Connection with the mains

Connect the connection cable of the power-unit with the IN-socket. Plug the power unit into your outlet.
DANGER OF FIRE!
9/10 00029706.DOC, Version 1.0