ASROCK K10N78-1394 Bedienungsanleitung Seite 21

Step 4. Boot into OS. Install Hybrid SLI
Hybrid SLI driver is in the following path of ASRock support CD:
TM
(There are two ASRock support CD in the motherboard gift box pack,
please choose the one for Windows
..\Drivers\Hybrid SLI driver\Vista
* Currently, Hybrid SLI
website for future update.
Step 5. Restart your computer. Then you will find the Hybrid icon on your Win-
dows taskbar.
®
Step 6. The default setting is GeForce
not need to adjust the setup anymore.
B . H y b r i d P o w e r B . H y b r i d P o w e r
B . H y b r i d P o w e r B . H y b r i d P o w e r B . H y b r i d P o w e r
T M T M T M T M T M
Step 1. Install one compatible PCI Express graphics card to PCIE1 slot (green). For
the proper installation procedures, please refer to section "Expansion Slots".
Step 2. Boot your system. Press <F2> to enter BIOS setup. Enter "Advanced"
screen, and enter "Chipset Settings". Then set the option "Hybrid SLI" to
[256MB] or [512MB]. And set the option "Primary Graphics Display" to
[Onboard].
Step 3. Save your BIOS change and exit BIOS setup.
Step 4. Power off your system.
Step 5. Connect the monitor cable to the correspondent connector on the I/O shield.
Step 6. Boot into OS. Install Hybrid SLI
Hybrid SLI driver is in the following path of ASRock support CD:
TM
(There are two ASRock support CD in the motherboard gift box pack,
please choose the one for Windows
..\Drivers\Hybrid SLI driver\Vista
* Currently, Hybrid SLI
website for future update.
Step 7. Restart your computer. Then you will find the Hybrid icon on your Win-
dows taskbar. Please click the icon and select the item "Save Power".
®
ASRock
driver from our support CD to your system.
TM
® Vista TM
driver only has Vista 32 version, please visit our
TM TM
® Boost mode (Boost Performance). You do
TM driver from our support CD to your system.
Vista
® TM
driver only has Vista 32 version, please visit our
TM TM
K10N78-1394 / K10N78
/ Vista TM 64-bit.)
/ Vista 64-bit.)
TM
Motherboard
2 1 2 1 2 1
2 1 2 1