Herunterladen Inhalt Inhalt Diese Seite drucken

LENCO PDR-19 Benutzerhandbuch Seite 6

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Memory 
When you power up the radio again after a switch off.it will automatically tune into the same station 
(DAB of FM) that was last selected. 
Storing stations 
You can store up to 10DAB stations to the memory presets for quick and easy recall of your favourite 
stations. 
To store a  preset, you must first be listening to the  station  that  you would like  to save. Press and 
hold  the  PRESET  button.  The  display  will  show  "Preset  Store<#:  (Empty)>".  If  a  station  is  already 
stored. The display will show "<#: Station name>". 
Press the PREV/NEXT buttons to select the preset station number 1‐10. 
To save to the selected preset station number, press the ENTER button. The display will then show 
"Preset# stored". 
Recalling a stored station 
Once you have saved a station to one of rthe preset buttons, you can: 
Press  the  PRESET  button  and  press  the  PREV/NEXT  button  to  select  your  desired  preset  station's 
number. 
Press the ENTER button to recall a preset station number. 
Station information on DAB mode 
Press the INFO/MENU button repeatedly to show the different program information. 
Signal Strength: Displays a signal bar with the strength of the current station. 
Bit Error Rate (BER): Provides daails of the signal error rate. 
Channel and Frequency: Displays the station's transmission channel number and frequency. 
PTY (Program Type): Shows the type and description of the program provided by the DAB station. 
Time and Date: Displays the time and date information provided by the broadcaster. 
DAB indicatiom: Indicates DAB mode. 
Dynamic Label Segment (DLS): Displays scrolling text information supplied by the broadcaster. 
FM opearation 
In order to switch the radio from DAB to FM mode, press the Power/Mode button once. 
Auto scan 
To search for an FM station, press the SCAN button. This will start scanning up the frequency band. 
To scan down the frequency band. Press and hold the SCAN button. 
Once a station has been found.the scanning will stop automatically. If no station is found, then the 
tuning will stop one it has cycled through the entire FM band (87.5‐108 MHz). 
 

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis