Safety
2.8.2
Dry running
Various components can be damaged within seconds due to dry
running.
Do not allow the pump to run dry.
2.8.3
Blockages in the pump
Dirt particles can clog and block the pump.
Do not install the pump on the bottom of the well/cistern.
2.8.4
Risk of frost
Drain the pump/unit and pipes at risk of freezing in plenty of
time.
Remove the pump/unit during periods of frost and store it in a
dry room.
2.8.5
Water temperature
The water temperature must not exceed 35 °C.
WG64.011.001-P
Fig. 1
10 EN
OFF
230V
CHEMICALS
H. max. 333 min. 111
Q. max. 333 min. 111
°C
0
06|2019