Safety
2.3
Safety regulations
The operator of the system is responsible for the adherence to all
relevant statutory regulations and guidelines.
Observe the following regulations when using the pump/unit:
– This manual
– Warning and information signs on the product
– The valid national regulations for accident prevention
– The internal occupational, operational and safety
regulations of the operator
2.4
Structural modifications and spare parts
Alterations or modifications can affect operational safety.
Never modify or alter the pump/unit without the
manufacturer's permission.
Only use original spare parts and accessories authorised by
the manufacturer.
2.5
Signs
Ensure that all the signs on the complete pump/unit remain
legible.
2.6
Residual risk
2.6.1
Falling parts
Attach the pump unit to both hooks.
Only use hoisting and load-bearing equipment which is
suitable and technically sound.
Do not stand under suspended loads.
2.6.2
Rotating parts
There is a risk of shearing and crushing due to exposed rotating
parts.
Only perform servicing when the pump/unit is not in
operation.
Prior to servicing, ensure the pump/unit cannot be switched
back on.
Immediately after finishing servicing, reattach or reactivate all
protective equipment.
8 EN
06|2019