Herunterladen Inhalt Inhalt Diese Seite drucken

Hitachi RAK-18QH8S W Bedienungsanleitung Seite 14

Indoor unit
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29
2
3
Press the
(TIME) button.
TIMER control button.
AM
PM
2
Set the turn-off time with
the TIMER control button.
PM
PM
2
Set the turn-on time with
the TIMER control button.
4
Set the turn-on time with
the TIMER control button.
PM
PM
AM
AM
The timer may be used in three ways: off-timer, on-timer, and on/off (off/on)-timer. Set the current time at fi rst
because it serves as a reference.
As the time settings are stored in memory in the remote controller, you only have to press the
button in order to use the same settings next time.
Set the current time with the
PM
PM
Example: The current time is 1:30 p.m.
3
Point the signal window of the remote controller toward the indoor unit, and press
the (RESERVE) button.
The
(OFF) mark starts lighting instead of fl ashing and the sign
lights. A beep occurs and the
3
Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE) button.
The
(ON) mark starts lighting instead of fl ashing and the
lights. A beep occurs and the
AM
AM
5
Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE) button.
The
(ON) mark starts lighting instead of fl ashing and the
lights. A beep occurs and the
– 11 –
4
Press the
(TIME) button again.
The time indication starts lighting instead of
fl ashing.
PM
PM
(TIMER) lamp lights on the indoor unit.
Example: The device will turn off at 11:00p.m.
PM
PM
The setting of turn-off time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn on at 7:00 a.m.
AM
AM
The setting of the turn-on time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn off at 10:30 p.m. and it will be turned on
PM
PM
at 7:00 a.m.
The settings of the turn-on/off times are now complete.
AM
AM
The time indication will disappear
automatically in 10 second.
To check the current time setting,
press the
(TIME) button
twice.
The setting of the current time is
now complete.
(RESERVED)
(RESERVED) sign
(RESERVED) sign
(RESERVE)

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis