Menu - H-tronic TSM 125 Bedienungsanleitung

6. MENU

6.1 FOR DEVICES WITH FIRMWARE V1.00
(until mid 2016)
Pressing the button SET will change the input menu as follows:
MENU STEP N1 – SWITCH ON
E 23
In this menu you can enter a temperature at which a connected device is to be
switched on (e.g. 23°C). Press button OK. The value can now be changed with
the buttons pq. The selection is confirmed by pressing the button SET and the
device will move to the next menu.
MENU STEP N2 – SWITCH OFF
A 21
In this menu you can enter a temperature at which a connected device is to be
switched off (e.g. 21°C). Press button OK. The value then can now be changed
with the buttons pq. The selection is confirmed by pressing the button SET and
the device will move to the next menu.
MENU STEP N3 – HIGHEST MEASURED TEMPERATURE
H 23
Identified by the H. This step will show you the highest measured temperature
(e.g. 23°C). The value can be deleted by pressing pq. The selection is confir-
med by pressing SET and the display will switch to the next step.
MENU STEP N4 – LOWEST MEASURED TEMPERATURE
L-12
Identified by the L. This step will show you the lowest measured temperature
(e.g. –12°C). The value can be deleted by pressing pq. The selection is confir-
med by pressing SET and the display will return to monitor mode.
Temperature Switch TSM 125 | 25