Daily Use - Zanussi ZDI14001 Benutzerinformation

1
3
Put 1 litre of water in the
salt container (only for the
first time).
5
F F illing the rinse aid dispenser
Caution! Only use rinse aid for dishwashers. Other
products can cause damage to the appliance.
D D aily use
1. Open the water tap.
2. Press the on/off button to activate the appliance.
Make sure that the appliance is in setting mode. Refer
to 'SETTING AND STARTING A PROGRAMME'.
• If the salt indicator is on, fill the salt container.
• If the rinse aid indicator is on, fill the rinse aid dis-
penser.
3. Load the baskets.
4. Add the detergent.
2
4
6
The rinse aid, during the last rinsing phase, helps to
dry the dishes without streaks and stains.
1
max
3
To adjust the released quantity of rinse aid, turn the se-
lector between position 1 (lowest quantity) and position
4 (highest quantity).
5. Set and start the correct programme for the type of
load and soil.
Loading the baskets
Refer to the supplied leaflet with examples of the
load of the baskets.
• Only use the appliance to wash items that are dish-
washer-safe.
2
4
19