Grundfos CIM 500 Montage- Und Betriebsanleitung Seite 26

GENIpro TCP port settings
This web page is only present when the Modbus TCP protocol has been selected, SW1 is in position 1. The
module can connect to a Grundfos PC tool and communicate with the product via the GENIpro TCP protocol.
Abb. 9 GENIpro TCP port settings
Object Description
For enabling or disabling of the GENIpro TCP protocol.
Enable GENIpro
TCP Default: Disabled.
The TCP port number of the module and that of the PC tool must be identical.
TCP Port Number
Default: 49152, IANA public port.
26