Specifications - Makita BJR181 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Shoe
3-2. Shoe button
4-1. Shoe button

SPECIFICATIONS

Length of stroke
Strokes per minute(min
Max. cutting capacities
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for sawing wood, plastic and ferrous
materials.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BJR181
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model BJR182
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Model BJR181
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 2.0 m/s
Explanation of general view
4-2. Shoe
5-1. Lock-off button
5-2. Switch trigger
6-1. Lamp
7-1. Hook
8-1. Blade clamp sleeve
8-2. Released position
Model
-1
)
Pipe
Wood
Overall length
Net weight
Rated voltage
) : 84 dB(A)
pA
) : 95 dB(A)
WA
) : 85 dB(A)
pA
) : 96 dB(A)
WA
value (tri-axial vector
2
) : 18.5 m/s
h,CW
2
BJR181
499 mm
3.7 kg
ENE020-1
Model BJR182
Work mode : cutting boards
Vibration emission (a
ENG905-1
Uncertainty (K) : 2.0 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
ENG900-1
the times when the tool is switched off and when it
sum) is running idle in addition to the trigger time).
3
8-3. Fixed position
9-1. Blade
10-1. Blade clamp lever
12-1. Limit mark
13-1. Brush holder cap
13-2. Screwdriver
BJR182
28 mm
0 - 2,900
130 mm
255 mm
449 mm
3.6 kg
D.C. 18 V
2
) : 19.5 m/s
h,CW
2
ENG901-1