Maintenance - Smeg KSET66 Bedienungsanleitung

MAINTENANCE

• The filters must be cleaned every 2 months
of operation, or more frequently for
particularly heavy usage.
• Remove the filters, one at a time, after
disconnecting the relative fastening
elements.
• Wash the filters, taking care not to bend
them. Allow them to dry before refitting.
• When refitting the filters, make sure that
the handle is visible on the outside.
• These filters are not washable and cannot be
regenerated, and
approximately every four months of operation,
or more frequently with heavy usage.
• Remove the grease filters.
• Remove the saturated activated charcoal filters,
as shown (A).
• Fit new filters (B), as shown.
• Replace the grease filters.
• 20 W halogen light.
• Remove the 2 Screws fixing the Lighting
support, and pull it out of from the Hood.
• Extract the Lamp from the Support.
• Replace with another of the same type, making
sure that the two pins are properly inserted in
the lamp holder socket holes.
• Replace the Support, fixing it in place with the
two Screws removed as above.
GB
Grease filters
CLEANING METAL GREASE FILTERS
Odour filters (Recirculation version)
REPLACING ACTIVATED CHARCOAL FILTERS
must be replaced
Lighting
LIGHT REPLACEMENT
B
A
15