Specifications - Makita LH1200FL Betriebsanleitung

ENGLISH
(Original instructions)
1 Bolt
2 Lower blade guard A
3 Top blade guard
4 Lower blade guard B
5 Screw
6 Hex bolt
7 Handle
8 Lever
9 Top surface of turn base
10 Periphery of blade
11 Guide fence
12 Pointer
13 Lock lever
14 Grip
15 Miter scale
16 Bevel scale
17 Power switch
18 Lamp switch
19 Switch for laser
20 Lamp
21 Stopper pin
22 Top table
23 Motor housing
24 Center cover
25 Socket wrench
26 Shaft lock
27 Saw blade

SPECIFICATIONS

Model
Blade diameter .................................................................................................................................................... 305 mm
Blade body thickness ........................................................................................................................... 1.6 mm – 2.4 mm
Hole diameter
For all countries other than European countries ............................................................................................. 25.4 mm
For European countries ...................................................................................................................................... 30 mm
Max. Cutting capacities (H x W) with blade 305 mm in diameter in the miter saw mode
Bevel angle
90°
45°
Max. Cutting capacities at 90° in the table saw (bench saw mode) ...................................................................... 52 mm
–1
) ............................................................................................................................................ 3,800
No load speed (min
Laser Type .................................................................................................. Red Laser 650 nm, < 1 mW (Laser Class 2)
Table size (W x L)................................................................................................................................307 mm x 465 mm
Dimensions (L x W x H) ..................................................................................................... 596 mm x 506 mm x 620 mm
Net weight ............................................................................................................................................................20.7 kg
Safety class .............................................................................................................................................................
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
12
Explanation of general view
28 Blade case
29 Arrow
30 Outer flange
31 Inner flange
32 Spindle
33 Ring
34 Riving knife
35 Area to press in
36 Hex bolts
37 Blade width
38 Rip fence holder
39 Guide rail on the top table
40 Clamping screw (A)
41 Clamping screw (B)
42 Rip fence
43 Line to be aligned with
44 Workpiece
45 Square nut
46 Washer
47 Scale
48 Adjusting screw
49 Dust nozzle
50 Dust bag
51 Fastener
52 Vacuum cleaner
53 Blade cover
54 Support
90°
95 mm x 155 mm
62 mm x 200 mm
64 mm x 155 mm
40 mm x 200 mm
55 Turn base
56 Vise arm
57 Vise rod
58 Holder
59 Vise knob
60 Projection
61 Vise shaft
62 Base
63 Vise
64 Spacer block
65 Aluminum extrusion
66 Small boss
67 Face/edge parallel
68 Wood screw
69 Glue together
70 Hole (7 mm in diameter)
71 Push stick
72 Auxiliary fence
73 Push block
74 Triangular rule
75 0° bevel angle adjusting bolt
76 Top surface of turn table
77 Arm
78 45° bevel angle adjusting bolt
79 Screwdriver
80 Brush holder cap
Miter angle
45° (left to right)
95 mm x 110 mm
62 mm x 135 mm
64 mm x 65 mm
40 mm x 85 mm
LH1200FL
/II