Gima 27500 Gebrauchs- Und Instandhaltungsanleitung Seite 7

7
Begin the assembly phase by setting up a stable horizontal
work plan.
1) Fix the adjustment rod for backrest by TE 6X35 screw and its hexagen nuts.
2) Only for Trendelenburg: fix the adjustment rod for the seat by TE 6X35 screw and its hexagen nuts.
3) Unscrew the TBE 8X16 screws fixed on the structure and screw them back by inserting the legs into the tubular
frame by the allen key supplied
4) Take TBE 8x25 screws and n.2 washers and fix the lower crossing tube to the legs by the allen key supplied.
5) Fix the adjustment rod for legrest by TE 6X35 screw and its self-locking nut.
6) Insert the leg-adjusting rod into the special perforated plate.
7) Fasten the leg supports to the front legs with 2 TBE 8X50 screws and 4 washers
8) Insert the support for the bowl into the tubular welded to the leg. Take the Steel bowl, place it on the support.
9) The KNOBS WITH PIN M6x20 Ø30 are fixed to the quality leg holders. Unscrew them, insert leg holders into the
tubular and screw knobs.
10) Screw and unscrew the KNOBS WITH PIN M8X20 Ø30 to adjust the height of the leg holders.
NB. The standard leg holders are mounted and they only must to be fixed and adjusted by knob.
ENGLISH