urmet 1093 Bedienungsanleitung Seite 46

DISPLAY – PRIVACY ZONE DISPLAYING AND DEFINITION
Use this option to access the selection screen, that allows to permanently display the selected areas. Use
ON and press again the camera button to access a screen where position and size of the selected area
can be changed. After selection, press again the central button and go back to the previous screen.
PRIVACY – MASKING ONE OR MORE PARTS OF A SCENE
The PRIVACY function allows to specify up to 8 privacy zones that mask specific areas, which become
invisible to the operator. A privacy zone is displayed on the screen with a rectangle, which colour and
transparence level have been previously selected by the user.
NOTES ABOUT PRIVACY ZONE
•
It is recommended to select privacy zones slightly larger than the area to be masked.
•
Privacy zones can only be rectangular.
Select PRIVACY ON and press the button to gain access to the following submenu:
SELECT
DISPLAY
COLOR
DEFAULT
RETURN
Option
SELECT
DISPLAY
COLOR
DAFAULT
RETURN
SELECT – AREA SELECTION
Select this option to display eight privacy zones. It is possible to define the number of areas displayed on
the screen and the size of each one.
Press the button on the bottom side of the camera to perform all the adjustments.
DISPLAY – MOTION-SENSITIVE AREA DISPLAYING AND DEFINITION
Use this option to access the selection screen, that allows to permanently display the selected areas. Use
ON and press again the camera button to access a screen where position and size of the selected area
can be changed. After selection, press again the central button and go back to the previous screen.
46
All manuals and user guides at all-guides.com
PRIVACY
AREA1
ON
2
RET
Value
This option allows to select one of the 8 available areas
AREA1 ÷ AREA8
This option allows to obtain the best performance of the
camera according to the monitor used to see images (see
ON ÷ OFF
It allows to select one of the 16 available colours to fill the
000 ÷ 016
previously selected area.
/
RET
Description
(see below)
below).
This option allows to reset the camera parameters to
factory settings.
This option allows to quit the menu.
DS1093-083