Bluetooth Connection; Human Interface Device (Hid) - i.safe MOBILE IS-MP.2 Schnellstartanleitung

POWERING ON AND OFF THE IS-MP.2
To powering ON the device, press the
The screen lights up and the device is in running order.
For powering Off the device, press the
The display indicates a 3 second countdown and turn off.
READ OF TRANSPONDERS
Hold the top of the device near to a transponder and make a short press on
If the transponder can be read, the display will indicate the transponder type and the
UID and the device gives a short vibrate.
If there is no transponder in reading area, the display will indicate "NO TAG" vibrate in
a longer sequence.
The multipen will indicate automatically supported transponders as follows:
LF 125/134 kHz: EM 41xx, EM 42xx, HTS, FDX-B, HDX
HF 13,56 MHz: ISO 15693, ISO 14443, NFC
UHF 860 MHz ... 960 MHz

BLUETOOTH CONNECTION

Turn the IS-MP.2 ON
function. For pairing with other devices push and hold
indicate "Pairing Bluetooth ..." and after successful pairing the IS-MP.2 will be listed
as RNBT-E5D5 in paired Bluetooth device.
The display of the IS-MP.2 will indicate "End of pairing". For existing connection the
display of the IS-MP.2 indicate a BT icon top right. For lost connection the BT icon will
be framed.
READ TRANSPONDERS ON PC OR ANDROID™ DEVICE
For reading the transponders via Bluetooth you have to install "WINDOWS
TIDMULTIPEN V.1.x" on PC. For Android device install the application
"TECTUS MultiPen" available on Google Play™ Store.

HUMAN INTERFACE DEVICE (HID)

Powering On and connect the IS-MP.2 with the delivered USB cable to the
USB port on your PC. The display of the IS-MP.2 lights up and indicate an USB icon
on top right of the display.
8
[On/Off
[On/Off
[On/Off Key]. Press
Key].
Key].
[Key 2]
for turn On and Off the Bluetooth
[Key
[Key
2]. The Display will
1].