Eu Declaration Of Conformity - i.safe MOBILE IS-MP.2 Schnellstartanleitung

ENGLISH
INTRODUCTION
This document contains information and safety regulations which are to be observed
without fail for safe operation of the device IS-MP.2 under the described conditions.
Non-observance of this information and instructions can have serious consequences
and/or may violate regulations.
Please read the manual and these safety instructions before using the device.
In case of contradicting information, the text of these safety instructions shall apply.
In case of any doubt, the German version shall apply.
The EU-declaration of conformity, certificates, safety instructions and manuals can be
found at www.isafe-mobile.com, or requested from i.safe MOBILE GmbH.
RESERVATION
Technical Data is subject to change without notice. Changes, errors and misprints
may not be used as a basis for any claim for damages. All rights reserved.
i.safe MOBILE GmbH cannot be held responsible for any data or other loss and direct
or indirect damages caused by any improper use of this device.
EX-SPECIFICATIONS
The IS-MP.2 is a device suitable for use in potentially explosive atmospheres classified
as zone 2/22 in accordance with directives 2014/34/EU and 2014/53/EU, as well as the
IECEx scheme.
EX-MARKINGS
ATEX:
II 3G Ex ic IIC T4 Gc IP54
II 3D Ex ic IIIB T135°C Dc IP54
EU Type Examination Certificate:
EPS 16 ATEX 1 067 X
CE-designation:
IECEx:
Ex ic IIC T4 Gc IP54
Ex ic IIIB T135 °C Dc IP54
IECEx Certificate: IECEx EPS 16.0026X
EU-DECLARATION OF CONFORMITY
The EU-declaration of conformity can be found at the end of this manual.
4
2004
North America:
Class I Div 2 Groups A, B, C, D, T4
Class II Div 2 Groups F, G, T135˚C
Class III Div 2
CSA1980022158
Temperature range:
-20 °C ... +55 °C
Manufactured by:
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany