Bosch GDS 18V-300 Professional Originalbetriebsanleitung Seite 13

Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Tool holder
A)
(2) Carrying strap
A)
(3) Belt clip
A)
(4) Battery
A)
(5) Battery release button
(6) "Automatic shutdown (ABR)" button
(7) "Automatic shutdown (ABR)" LED
(8) Rotational direction switch
(9) On/off switch
(10) "PowerLight" lamp
(11) Handle (insulated gripping surface)
(12) Application tool (e.g. impact socket)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless impact screw-
driver
Article number
with rechargeable battery
Rated voltage
No-load speed
Impact rate
Maximum torque, hard
screwdriving application ac-
cording to ISO 5393
Machine screw diameter
Tool holder
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
B)
– during operation and
during storage
Recommended batteries
Recommended chargers
Bosch Power Tools
Cordless impact screw-
driver
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) only for inductive batteries
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-2.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 100 dB(A); sound power level 111
dB(A). Uncertainty K = 3.0 dB.
Wear hearing protection
Total vibration values a
determined according to EN 62841-2-2:
Tightening screws and nuts of the maximum permitted size:
a
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
GDS 18 V-300
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
3 601 JD8 2..
power tool is used for other applications, with different ap-
"premium"
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
V= 18
increase the vibration and noise emissions over the total
-1
min 0–2400
working period.
-1
min 0–3400
To estimate vibration and noise emissions accurately, the
Nm 300 times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
mm M10–M18
Implement additional safety measures to protect the oper-
∎ ½"
ator from the effects of vibration, such as servicing the
A)
kg 1.6–2.6
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
°C 0 to +45
°C -20 to +50
u
GBA 18 V...
GBA 18 V...W
ProCORE18V..
AL 1814 CV
AL 1820 CV
AL 1860 CV
GAL 1880 CV
(triax vector sum) and uncertainty K
h
2 2
< 18 m/s , K = 1.5 m/s
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
1 609 92A 4Z1 | (25.01.2019)
English | 13
GDS 18 V-300
GAL 18V-..
GAL 3680 CV
GAX 18V-30
AL 3620 CV
C)
GAL 18.. W