Herunterladen Diese Seite drucken
Siemens DC1136 Montageanleitung
Siemens DC1136 Montageanleitung

Siemens DC1136 Montageanleitung

Ausgabebaustein
Abmessungen
Dimensions
Dimensions
153,5
4,5
135
Anschluss
Raccordement
Connection
Pro Klemme darf max. 1
Leiter 0,2 - 2,5mm
angeschlossen werden
1 conducteur de
2
0,2- 2,5mm
au max. peut
être raccordé sur une borne
Max. one conductor of
2
0.2- 2.5mm
in each terminal
DCA1136A
1
2
3
4
5
6
L
M
Melder-Bus
Bus de détecteur
Bestätiungsmeldung mit Arbeitskontakt
Detector Bus
Message de confirmation avec contact de
travail
Linienabschluss
Confirmation message with make contact
Elément de fin de ligne
Line termination
Bestätigungsmeldung mit Ruhekontakt
Message de confirmation avec contact de
repos
Confirmation message with break contact
x4946c
2016 - 04 - 20
Control Products and Systems
Siemens Building Technologies
M20x1.5
Zum Einschieben des Leiters, Fe-
derklemme mit Schraubenzieher
Nr. 0 (Klingenbreite max. 3,5mm)
entlasten
2
Pour insérer le conducteur, déga-
ger la borne à ressort avec un
tournevis no. 0 (largeur de la tige
3,5mm au max.)
In order to insert the wire, open
spring terminal with a screwdriver
no. 0 (blade width max. 3.5mm)
1
3
DCB1136A
NC
-
CO
-
Melder-Bus
Relaiskontakt
Bus de détecteur
Contact de relais
Detector Bus
Relay contact
Data and design subject to change without notice / Supply subject to availability
©
Siemens Building Technologies AG
DCA1136A
Klemmen für Melderbus und Rückmeldekontakt
Bornes pour bus de détection et contact de retro-
signalisation
Terminals for detector bus and feedback contact
5
DCB1136A
Vorsicht Fremdspannung
Attention tension étrangère
Attenzione tensione straniere
Danger external voltage
Warnetikette aufkleben
NO
-
Coller étiquette d'avertis-
sement
Adhere warning label
Dokument-Nr. / Document no.
Ausgabe / Edition
Ersetzt / Remplace / Supersedes
Handbuch / Manuel / Manual
Register / Registre / Section
Ausgabebaustein
Sous-ensemble
de sortie
Output module
Montageanleitung
Instructions de montage
Installation instructions
Taste für Adressvergabe
Touche pour l'attribution
de l'adresse
Key for address allocation
LED
Klemmen für Relaiskontakt
Bornes pour contact de relais
Terminals for relay contact
Mikroklemmen für T-Verzweigun-
gen oder Kabelabschirmung, für
2
Leiter 0,2 - 0,5mm
Micro-bornes pour dérivation en T
ou blindage de câble, pour
conducteurs 0,2 - 0,5mm
Micro terminals for T-tapping or
cable shielding, for conductors of
2
0.2- 0.5mm
DCA1191
535 203
x4946c
2016- 04- 20
x4946b
-
-
®
AlgoRex
DC1136
2
1
loading

Inhaltszusammenfassung für Siemens DC1136

  • Seite 1 Bestätigungsmeldung mit Ruhekontakt Message de confirmation avec contact de repos Confirmation message with break contact DCA1191 Data and design subject to change without notice / Supply subject to availability x4946c 2016 - 04 - 20 © 535 203 Siemens Building Technologies AG...
  • Seite 2 Building Technologies Division International Headquarters Gubelstrasse 22 CH−6301 Zug Tel. +41 41 − 724 24 24 www.siemens.com/buildingtechnologies Data and design subject to change without notice / Supply subject to availability 2016 - 04 - 20 © x4946c Siemens Building Technologies AG...