hager RTN100X Anleitung Seite 7

RTN100X
Configuration and calling functions
Setup in RTN300X/301X IP door speaker module
Key function overview
Start >>> Start >>>
Phone number entry Code entry
Entering phone numbers
The connected direct-dial keypad module can be used to dial any phone numbers. The IP door speaker module acts like a "normal"
telephone for this purpose. Follow this input scheme:
1234567890
Start entering phone number
Enter number:
>
Display with display call module connected (not needed to execute the function).
www.hager.com
Finish entry of phone num-
ber/code and dial
Enter number to be dialled
Enter number:
>1234567890
Subject to technical changes
Call >>>
Switchboard call
Calling:
1234567890
To operate the direct-dial key-
pad module, the extension in-
terface (EPORT) of the IP door
speaker module must be set to
button. This option is preset at
the factory.
If the module fails to behave as
expected, the call the Web in-
terface of the IP door speaker
and go to the Expert Configu-
ration area.
Under System, the Keypad
option must be set to Button.
Start >>>
Speed dial entry
Complete entry of phone number
and start dialling
Please wait...
>>>>>>>>>
7