Switching On The Unit - vigo EPK4550E05 Montage- Und Betriebsanleitung

Digital Electric Panel Convector Heater
TURN ON TIMER ADJUSTMENT
BUTTON AND CHILD
SAFETY LOCK
ON/OFF SWITCH
TEMPERATURE
DECREASE SWITCH

Switching on the Unit

Put the plug in a grounded socket to operate your appliance. Bring the power
switch (Figure l.) ON position (You will see the button on "I" position).
Push the On/Off ( ) button of your appliance for a short while. The unit will
turn on. You will see the room temperature on the Indicator Display 23 when the
appliance turns on.
NOTE: You can watch the product usage video in our web adress at
www.vigotr.com or type "Vigo Heater Video" on the internet research pages.
Increasing or reducing the temperature
You can adjust the temperature with the temperature increasing or reducing
pushbuttons on the right and left sides of the On/Off switch. If you want to
increase or reduce the temperature push the relevant button (for increasing ( )
button and for decreasing ( ) button) until the required temperature is provided.
Since the new adjusted temperature will be provided within a specific period of
time, actual room temperature will be displayed until the requested temperature
is provided. The unit will increase or decrease the power thereof until the adjusted
temperature is provided. (See Power Consumption Indicator).
36
Figure 14. Electronic Control Unit
INDICATOR DISPLAY
POWER CONSUMPTION
INDICATOR
TURN OFF TIMER
ADJUSTMENT BUTTON
TEMPERATURE INCREASE
SWITCH