Switching On The Unit - vigo EPK4570E10 Bedienungsanleitung

Digital Electric Panel Convector Heater
SAFETY LOCK
ON/OFF BUTTON
TEMPERATURE
DECREASE SWITCH

Switching on the Unit

Put the plug in a grounded socket to operate your appliance. Bring the power switch (Figure l.) ON position
(You will see the button on "I" position). Push the On/Off ( ) button of your appliance for a short while. The
unit will turn on. You will see the room temperature on the Indicator Display when the appliance turns on.
NOTE: You can watch the product use video in our web adress at
www.vigotr.com or type "Vigo Heater Video" on the internet research pages.
Increasing or reducing the temperature
You can adjust the temperature with the temperature increasing or reducing pushbuttons on the right and
left sides of the On/Off button. If you want to increase or reduce the temperature push the relevant button
(for increasing ( ) button and for decreasing ( ) button) until the required temperature is provided. Since
the new adjusted temperature will be provided within a specific period of time, actual room temperature will
be displayed until the requested temperature is provided. The unit will increase or decrease the power thereof
until the adjusted temperature is provided. (See Power Consumption Indicator).
14
21
Figure 14. Electronic Control Unit
INDICATOR DISPLAY
POWER CONSUMPTION
INDICATOR
TIMER SETTING BUTTON (TIMER)
TEMPERATURE INCREASE
SWITCH