vigo EPK4550E05 Montage- Und Betriebsanleitung Seite 34

Figure 8. Placing the
convector to the lower part
of the wall mounting brackets
Figure 10. Back view of
fastening the upper
32
5. Back side of the Electric Panel
Convector Heater with arrow sign
will be placed to the plastic part
of the wall mounting brackets as
shown in the figure 8. ()
6. The spring section on the wall
mounting brackets will be pulled
and put through the holes on the
upper part of the convector in order
to fix the unit.
Note: For any reason if you want to
uninstall your panel convector, you
should pull the upper hooks and
bend to front.
Figure 9. Attaching
upper hook of the wall
mounting brackets to
the convector
Figure 11. Dimensions
of the convector after
assembly