vigo EPK4550E05 Montage- Und Betriebsanleitung Seite 39

Programming the Timer
Turn on timer
Turn on timer covers a period of forty-eight (48) hours. The indicator display 23
will be set to zero if the program memory is set for more than forty-eight (48)
hours. E.g. you are leaving your house and want the appliance to operate before
you come home. In this case the plug must be placed in the socket and the power
switch (See Figure l.) has to be on and the on/off button should be off. You have
to push the turn on time setting button (
button. You have to keep the button pushed until the hour requested for the
commencement of the operation of the appliance appears on the screen. When
the setting is completed a warning light will appear on the indicator display and
will shine until the appliance starts to operate. The unit will run automatically on
the set time automatically and will start heating. If you want to reset the timer you
have to push the button ( ) to on position and then off again.
NOTE: You can watch the product usage video in our web adress at
www.vigotr.com or type "Vigo Heater Video" on the internet research pages.
Turn off timer
Turn off timer is a function for turning off the appliance automatically when the
appliance is working. Turn off timer of the unit is maximum 8 hours. You have
to push the turn off timer adjustment button (
stop the operation of the appliance appears on the screen. When the setting is
completed a warning light will appear on the indicator display and will shine until
the appliance starts to operate. This light will be on until the appliance is off and
the appliance will close automatically on the set time (hour) seen on the indicator
display. If you want to reset the timer you have to push the button ( ) to off
position and then on again.
37
) to without pushing the On/Off
) until the hour requested to
EN