vigo EPK4550E05 Montage- Und Betriebsanleitung Seite 35

EN
Usage Of Heater With Legs
• Open the package, take out the heater with its protective nylon and remove the
nylon cover. Plastic legs are in the package.
• If you want to use electric panel converters with legs, turn the heater upside
down and insert the tab on the plastic leg to the slot (1) under the heater and fix
the leg by turning it in the direction of the arrow (2) as shown in Figure A.
• Plastic legs will be fixed under the heater (3) by using a screwdriver with the
included screws and washers.
• Turn the heater back to original position and make it ready for usage.
• Can be used for both digital and manual models.
2
1
Figure A
Usage Of Heater With Fixed Legs (Optional)
The fixed leg assembly on which the heater will be placed has to be erected prior
to usage of Vigo freestanding electric panel convector heater. The hanger hooks
(1) are placed to the front side of the legs (2) in a way that the spring parts thereof
are at the top. Meanwhile support parts (3) should be placed on the back side of
the legs with screws and nuts through the holes (4).
33