Specifications - Makita DJR143 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Lock-off button
3-2. Lock-off lever
3-3. Switch lever
3-4. Switch trigger

SPECIFICATIONS

Model
Length of stroke
Strokes per minute (min
Max. cutting capacities
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for sawing wood, plastic and
ferrous materials.
Noise
The typical A-weighted
according to EN60745:
Model DJR143, DJR185
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DJR145, DJR183
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Explanation of general view
4-1. Lamp
5-1. Hex wrench
5-2. Hex bolt
5-3. Loosen
6-1. Recipro saw blade
6-2. Blade clamp sleeve
7-1. Saw blade
7-2. Blade clamp sleeve
-1
)
Pipe
Wood
noise level determined
) : 76 dB (A)
pA
) : 77 dB (A)
pA
value (tri-axial vector
DJR143 DJR145
392 mm (with BL1415)
397 mm (with BL1430 / BL1440)
1.5 kg (with BL1415)
1.7 kg (with BL1430 / BL1440)
D.C. 14.4 V
ENE020-1
Model DJR143, DJR145
Work mode : cutting boards
Vibration emission (a
ENG905-1
Uncertainty (K) : 1.5 m/s
Work mode : cutting wooden beams
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DJR183, DJR185
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting wooden beams
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
ENG900-1
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
sum)
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
3
8-1. Hex wrench
8-2. Bolt
8-3. Loosen
8-4. Tighten
10-1. Hex wrench
10-2. Protrusion
DJR183
13 mm
0 - 3,000
50 mm
50 mm
392 mm (with BL1815 / BL1815N / BL1820)
398 mm (with BL1830 / BL1840 / BL1850)
1.5 kg (with BL1815 / BL1815N / BL1820)
1.8 kg (with BL1830 / BL1840 / BL1850)
D.C. 18 V
2
) : 7.0 m/s
h,B
2
) : 7.0 m/s
h,WB
2
2
) : 8.0 m/s
h,B
2
) : 7.0 m/s
h,WB
2
DJR185
2
2
ENG901-1