Handling During Transportation And Storage; Templates And Assembly Instructions - Flexlock Visible 2.0 Handbuch

5. Place the programming card on the lock again for
about 3 seconds, then remove the card. Repeated
signals will sound.
6. Place the service card on the lock within 7 seconds,
a confirmation signal is heard.
(in Mode 2 locked) and ready to be used according to
the programmed mode.
7. Add users, see point 7.4 or change Mode, see point 7.1.

5 Handling during transportation and storage

With the battery mounted, we recommend the following:

6 Templates and assembly instructions:

See www.flexlock.se
7 SEC
The lock is now open
OK!
OK!
OK!
Min
60 mm
A shorter distances affects battery life
as well as function and reading distance.
4.2-5/6
English 7