Service Card; Troubleshooting Mode 1 & 2 - Flexlock Visible 2.0 Handbuch

11.3 Troubleshooting in mode 1 & 2 (unique users)
1. USER CARD
Wait for 7 sec and present the user card
straight and centered! Listen for sound.
Motorbuzz/confirmation signal = Lock OK
Error signal = Wrong user
No sound = Card might be defect

2. SERVICE CARD

Wait for 7 sec and present the service card
straight and centered! Listen for sound.
Motorbuzz/confirmation signal = Lock OK
Error signal = Wrong service card
No sound = Card or lock might be defect
3. PROGRAMMING CARD
Wait for 7 sec and present the programming
card straight and centered! Listen for sound.
Programming signal = Lock OK
Motorbuzz/confirmation signal =
Programming card is added as a service
card or user card.
Error signal = Wrong programming card
No sound = Card or lock might be defect
If nothing of the above works, contact your retailer!
14 English
1. Is it the correct storage?
2. Use the correct user card!
3. Add the user! See heading 7.4.
Add a new user! See heading 7.4.
1. Use the correct service card!
2. Add the service card!
See the manual.
Add new service card & user!
See the manual.
Reset the lock with a pin!
See heading 7.7.
1. Use the correct programming card!
2. Reset with pin! See heading 7.7.
Change the lock!