Important Remarks - Velleman GSCB Bedienungsanleutung

in your mobile phone to check whether the card is legible. The red LED will flash if the battery voltage is too low. If
so, replace the battery and try again.
3. Input (backup): Press the B button and the system will back up the information of the SIM card on the GSCB. The
green LED will flash slowly throughout this process. The process has been completed successfully when the
green LED lights steadily while the red LED fades out. The green LED flashes quickly in case of problems with
the backup process.
4. Output (copy): Press the R button and the system will copy the information stored on the GSCB onto the SIM
card. The green LED will flash slowly throughout this process. The process has been completed successfully if
the green LED lights steadily while the red LED fades out. The green LED flashes quickly in case of problems
with the copying process.
6. Check
You can easily check whether the information stored on the SIM card has been backed up on the GSCB. Delete one
name on the SIM card and then copy the data stored on the GSCB back to the SIM card. The deleted name should
now be stored on the SIM card again.

7. Important Remarks

• This device only backs up the names and numbers stored on the SIM card. Those stored in the memory of your
mobile phone are not backed up. To back up these names and numbers as well you must first save them on a
SIM card and then back them up on the GSCB.
• Do not remove the SIM card while copying or backing up data. Doing so may destroy the information on the SIM card.
• The backup device only works with one SIM card at a time.
• The backup device only backs up names and numbers and does not back up messages you may have saved on
the SIM card.
• This backup device can only hold the data contained on one single SIM card. All previously saved data are
automatically overwritten when a new backup is made.
• When the backed up information is copied back to the SIM card, all data previously saved on the SIM card are
automatically overwritten.
PROBLEM
Red LED does not respond when
SIM card is inserted
Green LED flashes fast when the B
button is pressed
Green LED flashes fast when the R
button is pressed
Red LED is lit normally but doesn't
respond when one of the buttons is
pressed
The information in this manual is subject to change without prior notice.
GSCB
CHECK
Check the battery
Check if SIM card is inserted
correctly
Check if SIM card is protected by
PIN code
Check if SIM card is legible
Check if SIM card is protected by
PIN code
Check if SIM card is legible
Make sure the GSCB is not empty
Check if SIM card is legible
Check if SIM card is inserted
correctly
- 2 -
SOLUTION
Reinstall or replace the battery
Reinsert the SIM card
Deactivate the PIN code protection in
the menu of your mobile phone
Deactivate the PIN code protection in
the menu of your mobile phone
Reinsert the SIM card
VELLEMAN