Installation Check-Up - LaCimbali M39 Dosatron TE Gebrauch Und Installation

These chapters in the manual are to be used by qualified, authorized technical staff.
WaRnInG: AFTER INSTALLATION, CHECK TO SEE IF THE MACHINE IS WORKING PROPERLY (see the
Installation Module C)
WATER CONNECTIONS
• No leaks from the connections or tubes
FUNCTIONING
• Boiler and operating pressures are normal.
• The pressure gauge is working properly.
• The self-leveling device is working properly.
• The expansion valves are working properly
WaRnInG: ONCE THE MACHINE HAS BEEN INSTALLED AND IS READY FOR USE, BEFORE ALLOWING THE
WORKER TO START USING THE MACHINE, WASH THE INTERNAL COMPONENTS ACCORDING TO THE
INSTRUCTIONS BELOW:
GRoUpS
• Hook up the filter holders to the groups (without coffee).
• Let each group dispense water for about a minute.
HoT WaTER
• Continuously dispense hot water (pressing the appropriate button) until at least 5 liters of water have been used for a ma-
chine with 2 groups, 8 liters for a machine with 3 groups and 10 liters for a machine with 4 groups (see the "Cleaning and
Maintenance" Chapter in the User's Manual).
STEam (also with Turbosteam)
• Dispense steam from the nozzles for about a minute, using the appropriate buttons.

6. Installation Check-up

44