Topcom Callmaster 250 Bedienungsanleitung Seite 33

Callmaster 250
1 Installation
2 Description
3 Settings
3.1 Select language
3.2 Setting Date and Time
3.3 Set the area code and the area prefix
3.3.1 Set the area code
3.3.2 Set the area prefix
3.3.3 Use of the area code and the area prefix
3.4 To set the handset
3.5 To set the warning signal New Messages
4 Operation
4.1 Announcement of incoming calls
4.2 Handset Operation
4.2.1 You want to be connected with the caller
4.2.2 You don't want to be connected with the caller
4.3 To check calls
4.4 To record a name
4.4.1 Add a name to a number in the call list
4.4.2 Add a name to a pre-programmed number in the call list
4.5 To add a recorded name to different numbers
4.6 To check a name
4.7 To record an outgoing message (OGM) for a particular caller
4.7.1 To record an outgoing message (OGM)
4.7.2 To select an outgoing message
4.8 To check the outgoing message (OGM)
4.9 To adjust the volume
4.10 To erase calls
4.10.1 To erase one call
4.10.2 To erase all calls
4.11 Call back
4.12 To set default settings (reset)
4.13 Voice mail
4.14 Solving problems
4.14.1 The Callmaster 250 doesn't respond properly to commands
4.14.2 The unit doesn't announce any calls
4.14.3 The call back function doesn't work properly
5 Warranty
34 34 34 34 34
35
35
36
36
36
37
37
37
37
38
38
39
39
40
40
40
40
41
41
41
42
43
43
43
43
44
44
45
45
45
45
45
46
46
46
46
46
47