Troubleshooting - DS Produkte MS-101 Bedienungsanleitung

Troubleshooting

If the device does not function properly, fi rst check whether the problem can be solved
by yourself. If these steps do not solve the problem, contact customer service.
Do not try to repair an electrical device yourself!
Problem
The machine
does not start.
The thread
breaks.
Stitches are
omitted.
The fabric
curls.
The fabric
was moved
incorrectly.
The needle
breaks.
02927_De-EN-FR-NL_A5_V3.1.indb 21 02927_De-EN-FR-NL_A5_V3.1.indb 21
Possible cause/solution
• Battery operation: The batteries have been inserted incorrectly or
are empty. Insert new batteries.
• Mains operation: The mains adapter is not plugged correctly into
the socket or the cable is not properly connected to the product.
The socket is
Check the fuse of the mains connection.
• The thread is not threaded properly.
• The thread is tangled.
• Thread tension is too high.
• The thread reel or coil was not placed correctly.
• The needle is bent or dull.
• The combination of needle size/thread size/fabric is not correct.
• The needle was inserted incorrectly.
• A bad needle is used.
• The combination of needle size/thread size/fabric is not correct.
• There are fi bres or lint on the throat plate.
• The thread guide is not correct.
• Thread tension is too high.
• The thread guide is not correct.
• The wrong needle is used.
• The combination of needle size/thread size/fabric is not correct.
• The combination of needle size/thread size/fabric is not correct.
• A bad needle is used.
• The thread is tangled.
• The needle was not inserted correctly.
• A bad needle was used.
• The combination needle size/thread size/fabric is not correct.
• The fabric is pulled too much. Let the carrier push the fabric
further, not pull on the fabric.
21
defective. Try
EN
another socket.
24.10.2019 11:46:51 24.10.2019 11:46:51