Jaga CLIMA CANAL H8 Montageanleitung Seite 43

07
Fit the final finish.
09
Mark the drill holes. Drill the holes and place the plugs. (08mm)
Use the correct plug for your floor type.
11
Use the control screws to adjust the unit to the desired height.
Make sure that the top of the device is aligned with the finished
floor.
CLIMA CANAL H8 / H10 | MANUAL | V_02
08
20
Install the device with the coil facing the wall or window.
Curtains to the floor: Place the device at least 20 cm from the
window.
10
Fix the device to the floor, thanks to the height control in combina-
tion with the rubber sound decouplers.
12
Secure the height.
EN
43