Charging With The Supply Unit; Using The Appliance - Philips SBT720 Handbuch

10
English
Length settings
10
0.5
Charging

Charging with the supply unit

Using the appliance

Remaining battery capacity
The remaining battery charge is shown by the
lights of the battery charge indicator that light up
continuously.
The selected length setting is shown on the display
above the zoom wheel when you select the
desired hair length setting with the zoom wheel.
Charge the appliance before you use it for the first
time and when the battery status indicator
indicates that the battery is almost empty.
Charging takes approx. 1 hour. A fully charged
appliance has an operating time of up to 80
minutes.
1 Make sure the appliance is switched off.
2 Put the small plug in the appliance and put the
supply unit in the wall socket.
The battery status indicator indicates that the
appliance is charging.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
Always check the appliance and all accessories
before use. Do not use the appliance or any
accessory if it is damaged, as this may cause