Using The Appliance - Philips 9000 Serie Bedienungsanleitung

ENGLISH
6
Charging in the charging stand
1 Put the small plug in the charging stand.
2 Put the adapter in the wall socket.
3 Place the appliance in the charging stand.
4 After charging, remove the adapter from the wall socket and pull the
appliance plug out of the charging stand.
Charging with the adapter
1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance.
3 Put the adapter in the wall socket.
4 After charging, remove the adapter from the wall socket and pull
the small plug out of the appliance.
Optimising the lifetime of the rechargeable battery
When you have charged the appliance for the first time, we advise you to
use it until the battery is completely empty. Continue to use the appliance
until the motor almost stops operating during a session. Then recharge the
battery. Follow this procedure at least twice a year.

Using the appliance

The hair length settings are indicated in millimeters. The settings
correspond to the remaining hair length after trimming.
Be careful when you trim for the first time. Do not move the trimmer
too fast. Make smooth and gentle movements.
Tip: Start trimming at a high length setting and reduce the length setting
gradually until you have reached the desired hair length.