Husqvarna LC 141VLi Bedienungsanweisung Seite 14

Do not use the product if it is
•
defective.
Do not change this product or
•
use it if it is possible that it has
been changed by others.
Work area safety
WARNING: Read the warning instructions
that follow before you use the product.
Remove objects such as
•
branches, twigs and stones
from the work area before you
use the product.
Objects that hit against the
•
cutting equipment can eject
and cause damage to persons
and objects. Keep bystanders
and animals at a safe distance
from the product.
Never use the product in bad
•
weather such as fog, rain,
strong winds, intense cold and
risk of lightning. To use the
product in bad weather or in
moist or wet locations is tiring.
Bad weather can cause
dangerous conditions, such as
slippery surfaces.
Look out for persons, objects
•
and situations that can prevent
safe operation of the product.
Look out for obstacles, such
•
as roots, stones, twigs, pits
and ditches. Long grass can
hide obstacles.
14
To cut grass on slopes can be
•
dangerous. Do not use the
product on ground that slopes
more than 15°.
Operate the product across
•
the face of slopes. Do not
move up and down.
Be careful when you go near
•
hidden corners and objects
that prevent a clear view.
Work safety
WARNING: Read the warning instructions
that follow before you use the product.
Use this product to cut grass
•
lawns only. It is not permitted
to use it for other tasks.
Use personal protective
•
equipment. See
protective equipment on page
15 .
Do not operate the product in
•
rain or wet conditions. The risk
of electrical shock increases if
water enters the product.
Do not operate the product
•
unless the blade and all
covers are attached correctly.
An incorrectly attached blade
can come loose and cause
personal injury.
Make sure that the blade does
•
not hit objects such as stones
and roots. This can do
damage to the blade and bend
the motor shaft. A bent axle
Personal
71 - 005 - 18.05.2018