Intended Use - Makita DFL083F Betriebsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening torque
Square drive
*1
No load speed
Rated voltage
Overall length
(Depending on the battery)
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
*1
• No load speed is adjustable with exclusive application.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.

Intended use

The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model DFL083F
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
Model DFL125F
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
Model DFL204F
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
Model DFL302F
Sound pressure level (L
Uncertainty (K) : 3dB(A)
Model DFL403F
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
Wear ear protection.
Hard joint
Soft joint
) : 70 dB(A) or less
pA
) : 70 dB(A) or less
pA
) : 70 dB(A) or less
pA
) : 70 dB(A) or less
pA
) : 70 dB(A) or less
pA
DFL083F DFL125F
2 - 8 N•m 5 - 12 N•m
2 - 8 N•m 5 - 12 N•m
150 - 700 100 - 700
-1 -1
min min
464 - 481 mm
1.7 - 2.1 kg
BL1415N / BL1415NA / BL1430 / BL1430B / BL1440 / BL1450 /
BL1460A / BL1460B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model DFL083F
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DFL125F
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DFL204F
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DFL302F
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DFL403F
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
4 ENGLISH
DFL204F DFL302F
8 - 20 N•m 16 - 30 N•m 25 - 40 N•m
8 - 20 N•m 16 - 30 N•m 25 - 40 N•m
9.5 mm
100 - 440 70 - 230
-1 -1
min min
D.C. 14.4 V
503 - 520 mm
2.0 - 2.3 kg
2
) : 2.5 m/s or less
h
2
2
) : 2.5 m/s or less
h
2
2
) : 2.5 m/s or less
h
2
2
) : 2.5 m/s or less
h
2
2
) : 2.5 m/s or less
h
2
DFL403F
50 - 220
-1
min