General Device Description; Delivery Content - OSRAM e:cue SYMPL dali Node AB444230035 Installationsanleitung

General device description

2 General device description
e:cue SYMPL Nodes are a system of interfaces for e:cue SYMPHOLIGHT
only. They provide various connection types like DMX512, DALI, digital
inputs and outputs etc. SYMPL Nodes always operate in online mode, as a
device interface for SYMPHOLIGHT. All interactions are initiated and
controlled by SYMPHOLIGHT. Connections between servers, Cores and
Nodes are always made with e:net via Ethernet.
The e:cue SYMPL dali Node is a single line DALI interface. It provides a
DALI interface for up to 64 DALI devices in one line including bus power
and full support for DALI ballast and OSRAM sensors / inputs. The
SYMPL dali Node is powered by an external power supply. It is easily
mounted on standard 35 mm DIN rails, or with a key hole in the housing
base on walls or on any stable vertical surface. Via SYMPHOLIGHT, DALI
commands like linear dimming curve (DT6), RGB, RGBW, and Color
Temperature (DT8) are supported. The SYMPL dali Node is a simple,
reliable and easy to use interface solution for e:cue lighting control solutions
with SYMPHOLIGHT
To operate SYMPL Nodes a SYMPHOLIGHT version 2.0 or
i
higher is mandatory. Earlier versions do not support the
SYMPL Nodes. SYMPL Nodes are not supported by the
e:cue Lighting Application Suite.
e:cue SYMPL dali Node is not hot-pluggable.
i
2.1

Delivery content

Delivery content for the e:cue SYMPL dali Node (AB444230035):
1. e:cue SYMPL dali Node
2. Safety instructions
3. Installation guide (English only)
08