Network Configuration; Default Network Properties; Network Configuration With Sympholight - OSRAM e:cue SYMPL dali Node AB444230035 Installationsanleitung

5

Network configuration

The configuration of the e:cue SYMPL dali Node is completely done via
e:cue SYMPHOLIGHT. See the SYMPHOLIGHT System Manual for details
on configuration, available at www.ecue.com.
The network properties of the SYMPL dali Node are preconfigured. The
successful installation of the power supply is required for changing the
network configuration. You can either adjust the network settings with
SYMPHOLIGHT or using the web interface of the SYMPL dali Node. Via the
web interface extended DALI settings are configurable.
5.1

Default network properties

The SYMPL dali Node has as factory setting the default IP address
192.168.123.1.
DHCP is enabled by default.
Login credentials for the web interface of the SYMPL dali Node:
The default password is: ecue
To change the network configuration use either SYMPHOLIGHT or the web
interface of the SYMPL dali Node:
5.2

Network configuration with SYMPHOLIGHT

1. Open the context menu of the SYMPL dali Node in the Setup tab
of SYMPHOLIGHT by a right-click on the device.
Network configuration
17