Firmware Update - OSRAM e:cue SYMPL dali Node AB444230035 Installationsanleitung

Firmware Update

Test mode via Web interface
The web interface of the SYMPL dali Node provides four different test
patterns. To access the web interface, open a common web browser on a
connected PC. Enter the SYMPL dali Node's IP address into the address
bar:
e.g. http://192.168.123.1.
Open the Test mode page by selecting "TestMode" on the left side of the
web interface of the SYMPL dali Node:
Click a button to run the chosen test:
Property
Recall MAX level
Recall MIN level
Set direct ARC
level
Toggle MIN MAX
Exit the Test mode by leaving the Test mode page, e.g. go to "Dashboard",
or by double-pressing the Identify button.
7 Firmware Update
To update the SYMPL dali Node, a connection of the SYMPL dali Node to
SYMPHOLIGHT is required.
22
Description
Sets all devices to their maximum value level.
Sets all devices to their minimum value level.
Sets all devices to the defined direct ARC level. Set
the level at the right drop-down field.
Toggles between 0 and the maximum value level. Set
the toggle time interval at the right drop-down field.