Security Instructions; Symbols; General Security Instructions - OSRAM e:cue SYMPL dali Node AB444230035 Installationsanleitung

1

Security instructions

Please read the safety instructions, provided in a separate manual, carefully.
Make sure that the environmental, mounting, and installation prerequisites
are met. This manual should be kept at a safe place and in reach of the
installation.
1.1

Symbols

The exclamation mark warns about possible damage of the
!
device itself or connected devices.
The information symbol gives general hints and informs
i
about handling and procedures for use of the device.
1.2

General security instructions

Connect cables and data only when the device is powered
!
down.
For electrical safety reasons it is not allowed that SYMPL dali
!
Nodes share the same power supply with other SYMPL
nodes, such as SYMPL dmx Node etc.
Please make sure to use one dedicated power supply unit
only for the DALI devices.
The device must be supplied by a separate certified SELV
!
Class 2 power supply.
The maximum length of each connected cable is 30 m.
!
If safety instructions are missing, please contact OSRAM to
i
receive a new copy.
Security instructions
07