General Remarks; Transport; Unpacking; Warranty Regulations - OSRAM e:cue SYMPL dali Node AB444230035 Installationsanleitung

General remarks

3 General remarks
3.1

Transport

Only transport the device in its original packaging. This protects the device
from damage.
3.2

Unpacking

Only unpack the e:cue SYMPL dali Node at its installation location. To
protect the device against condensation water, unpack it and wait until all
moisture remaining in the device has evaporated. Condensation can occur
when the device is moved from a cold to a warm location. Keep the
packaging for use in case of further transport. Inspect all parts for
completeness regarding chapter „2.1 Delivery content" on page 08. If
there is apparent damage to the device or parts are missing from the
delivery scope, please contact the OSRAM Support service.
3.3

Warranty regulations

Depending on the product, guaranty regulations are of different duration.
The warranty time is usually noted in the quote and in the order
confirmation. See "Services"  "OSRAM Guarantee" at www.osram.com
for details. Legal warranty regulations apply in any case.
3.4

Maintenance and Repair

This device requires no maintenance.
Before dismounting, appropriate measures must be taken to
!
protect the respective components against damage caused
by electrostatic discharge (ESD protection).
Do not try to repair the device. Return it to your OSRAM
!
distributor for replacement or repair.
12